Check and select the suitable membranes for water and wastewater treatment projects.
Wuhan Tanal Industrial Co., Ltd.

Products >> Industrial RO Element >> Hydranautics RO Membrane Element

  • Hydranautics CPA2-8040
Hydranautics CPA2-8040

Hydranautics CPA2-8040

Hydranautics RO Membrane Element CPA2-8040

The Hydranautics CPA2-8040 is a spiral-wound reverse osmosis (RO) membrane element comprising a composite polyamide material.
Hydranautics RO Membrane Element CPA2-8040 Data sheet


Performance

Permeate Flow:

10,000 gpd (37.9 m3/d)

Salt Rejection:

99.7% (99.5% minimum)

 

 

Type

Configuration:

Spiral Wound

Membrane Polymer:

Composite Polyamide

Membrane Active Area:

365 ft2 (36.9 m2


Application Data*

Maximum Applied Pressure

600 psig (4.16 MPa)

Maximum Chlorine Concentration

< 0.1 ppm

Maximum Operating Temperature

113℉ (45℃)

pH Range, Continuous (Cleaning)

2-10 (1-12)*

Maximum Feedwater Turbidity

1.0 NTU

Maximum Feedwater SDI (15 mins)

5.0

Maximum Feed Flow

75 gpm (17.0 m3/h)

Minimum Ratio of Concentrate to Permeate Flow for any Element

5 : 1

Maximum Pressure Drop for Each Element

10 psi


* The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. 

Test Conditions

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions: 
  • 1500 PPM NaCl solution 
  • 225 psi (1.55 MPa) Applied Pressure 
  • 77 °F (25 °C) Operating Temperature 
  • 15% Permeate Recovery 
  • 6.5 - 7.0 pH Range 
Dimensions
Hydranautics Membrane CPA2-8040 Dimensions
 
 

A, inches(mm)

B, inches(mm)

C, inches(mm)

Weight, lbs. (kg)

40.0 (1016)

7.89 (200)

1.125 (28.6)

36 (16.4)

Notice: Permeate flow for individual elements may vary + 35 or - 15 percent. Membrane active area may vary +/-4%. All membrane elements are supplied with a brine seal, interconnector, and o-rings. Elements are vacuum sealed in a polyethylene bag containing less than 1.0% sodium meta-bisulfite solution and then packaged in a cardboard box.

Notice:
If your customer insists existing brand, please contact Hydranautics or its distributors.
If you and your customer accept economical & quick-delivery equivalent of similar or better performance with same warranty, kindly send us an inquiry now.

WechatClose
Wechat
WhatsappClose
Whatsapp