Products >> Hollow Fiber UF Membrane >> Pentair X-Flow UF Membrane Module

Pentair Aquaflex 64 UF Membrane

Product No.：Aquaflex 64
Online Inquiry

AQUAFLEX HP
ARTICLE CODE : 2271FL295H

General Information

Pentair Aquaflex 64 UF Membrane is an ultrafiltration module, used for production of process and potable water. Typical applications are the filtration of surface water, potable water and WWTP effluent. Mode of operation is feed-and-bleed with a minor crossflow or dead-end mode with regular backwash (permeate only) and chemically enhanced backwash.

The Aquaflex 64 modules have the following general properties and characteristics:

Hydrophilic membrane composed of a blend of polyvinylpyrrolidone and polyethersulfone
A nominal pore size of 20 nm
Structure asymmetric/microporous
High performance and a very good anti fouling behaviour
Typical permeate quality SDI<3, turbidity <0,1 NTU
Membrane filtration provides 99.9999% (LOG6) reduction of bacteria (Pseudomonas diminuta) and 99.99% (LOG 4) reduction of virus (MS2 colifages) by mechanical means. EPA Est. No. 090374-NLD-001

Pentair Aquaflex 64 UF Membrane Product Data Sheet

Module Dimensions

Model

Feed connection
D₀
mm/Inch

Module length
L₀
mm/Inch

Permeate connection
D₀
mm/Inch

Aquaflex 64

220.0/8.66

1537.5/60.52

42.6/1.68

Physical and Operating Specifications

Specifications	Parameters
Model	Aquaflex 64
Membrane area (m²/ft²)	64/689
Membrane diameter (mm/mil)	0.77/30.3
Housing material	PVC white
Flow distributor material	PVC/PVC
Potting material	PU resin
Membrane material	PES/PVP
Max. system pressure	300 kPa /43 psi
Max. trans-membrane pressure	300 kPa /43 psi
Max. backwash pressure	300 kPa /43 psi
Temp. range	0-40℃ /32-104°F
pH-Continuous operation	2-12
pH-CIP	1-13
Dry weight of membrane element	ca. 34 kg /75 lbs
Wet weight filled with water	ca. 66 kg/145 lbs
Crossflow f low rate (superficial velocity)	20.8 × v m³/h 41.3 × v gpm
Pressure-drop across module at 0.2 m/s	16 kPa /2.3 psi
Pressure-drop across module at 0.5 m/s	40 kPa /5.8 psi

(v) in m/s [ft/s]

Operation guidelines

To avoid mechanical damage, do not subject the membrane module or element to sudden temperature changes, particularly decreasings. Bring the module or element back to ambient operating temperature slowly (max. value 3 °C/min).

Storage

New membrane modules can be stored as supplied in the original packaging. The membrane modules contain an aqueous preservation solution of glycerine (20wt%) and sodium metabisulfite (1wt%) to prevent dehydration and control bacterial growth. The membrane modules are packed in plastic bags which are vacuum sealed to keep the moisture in the module. Membrane modules should be stored in a dry, normally ventilated place, away from sources of heat ignition and direct sunlight. X-FLOW BV Storage temperature should be between 0 and 40 °C.

From EN 3419

Notice:
If your customer insists existing brand, please contact Pentair or its distributors.
If you and your customer accept economical & quick-delivery equivalent of similar or better performance with same warranty, kindly send us an inquiry now.