Products >> Hollow Fiber UF Membrane >> Suez GE UF Membrane
GE ZeeWeed 1500-600 (ZW1500-600)
- Product No.:ZW1500-600
General Information
As a pioneer of membrane technology, GE leverages decades of research, development, and operational experience in developing one of the most advanced pressurized ultrafiltration technology in the market, ZeeWeed 1500-600. ZeeWeed systems are proven to consistently outperform conventional filtration technology while meeting or exceeding regulatory requirements, regardless of source water quality.
Applications
Versatile and reliable, the pressurized ZeeWeed 1500-600 is ideally suited for use in numerous applications including drinking water treatment, tertiary filtration and RO pre-treatment for brackish water and seawater. Compared to granular filter media, ZeeWeed membranes produce superior water quality and are virtually unaffected by variable raw water quality - all at a cost comparable to conventional filtration technology.
General Properties
- 0.02 µm nominal pore diameter - for optimal removal of particulates, bacteria and viruses
- PVDF hollow fiber membrane - provides high mechanical strength and chemical resistance
- Outside-in filtration - provides uniform flow distribution and high solids tolerance
GE ZeeWeed 1500-600 (ZW1500-600) Product Data Sheet
Figure 1
Figure 2
Specifications
Model |
GE ZeeWeed 1500-600 |
Module part number |
3098728 |
Nominal membrane surface area |
55.7 m2 /600 ft2 |
Max shipping weight1 |
32 kg /70 lb |
Lifting weight2 |
30 - 36 kg /65 - 80 lb |
Membrane material |
PVDF |
Nominal pore size |
0.02 micron |
Nominal fiber diameter |
OD: 1.1 mm, ID: 0.66 mm |
Flow path |
Outside-In |
Housing material |
PVC housing with Noryl caps |
1 Packaged
2 Varies with solids accumulation
Module Dimensions |
|
Height |
1920 mm /75.6 in |
Pipe Diameter |
180 mm /7.1 in |
Permeate Connection |
Victaulic |
Feed Connection |
Victaulic |
Reject Connection |
Victaulic3 |
3 Module available with compression permeate and/or threaded reject connection(s)
Operating Parameters
Flow range |
45 - 180 m3/day 8 - 33 gpm |
Max shell inlet pressure |
379 kPa /55 psi |
TMP range |
0 - 276 kPa /0 - 40 psi |
Max temperature |
40°C /104°F |
Operating pH |
5.0 - 10.0 |
|
8.3 m3/h 5 dcfm |
|
1.8 m3/hr 8 gpm |
Cleaning pH range |
2.0 - 12.0 |
Max chlorine concentration |
1,000 mg/L (as NaOCl)4 |
4 NOTE: Higher concentrations are possible depending on feedwater and pH.
Storage and Handling
Modules may be stored in the original factory packaging for up to 1 year prior to installation. Modules must be stored between 5°C and 35°C (41°F to 95°F). Do not expose the membrane module to sources of heat, ignition, or direct sunlight (UV light).
From FSufZW1500-600_EN
Notice:
If your customer insists existing brand, please contact Veolia or its distributors.If you and your customer accept economical & quick-delivery equivalent of similar or better performance with same warranty, kindly send us an inquiry now.
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: inquiry@tanaltech.com
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China