Products >> Industrial RO Element >> Hydranautics RO Membrane Element

Hydranautics SWC5-4040 RO Membrane

Product No.：SWC5-4040
Online Inquiry

RO Membrane Element SWC5-4040

Hydranautics SWC5 series SWC5-4040 offers maximum energy efficiency at the lowest costs, making them a popular choice for use in large-scale desalination plants. Its innovative design and its ability to handle high operating pressures allow for a significant reduction in energy consumption and operating costs, without compromising the quality of the produced water.
Hydranautics SWC5-4040 Product Data Sheet

Performance

Permeate Flow	1,900 gpd (7.2 m³/d)
Salt Rejection	99.7% (99.5% minimum)

Type

Configuration	Spiral Wound
Membrane Polymer	Composite Polyamide
Membrane Active Area	85 ft² (7.9 m²)

Application Data

Maximum Applied Pressure	1200 psig (8.27 MPa)
Maximum Chlorine Concentration	< 0.1 PPM
Maximum Operating Temperature	113 ℉ (45 ℃)
pH Range, Continuous (Cleaning)	2-11 (1-13)
Maximum Feedwater Turbidity	1.0 NTU
Maximum Feedwater SDI (15 mins)	5.0
Maximum Feed Flow	16 GPM (3.6 m³/h)
Minimum Recovery for any Element	10%
Maximum Pressure Drop for Each Element	10 psi

* The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Text Conditions

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

32,000 ppm NaCl
800 psi (5.5 MPa) Applied Pressure
77 °F (25 °C) Operating Temperature
10% Permeate Recovery
6.5 - 7.0 pH Range

Element Details

A, inches (mm)	B, inches (mm)	C, inches (mm)	Weight, lbs. (kg)
40.0 (1016)	3.95 (100.3)	0.75 (19.1)	8 (3.6)

Core tube extension = 1.05" (26.7 mm)

Notice 1: Permeate flow for individual elements may vary + or - 20 percent. All membrane elements are supplied with a brine seal, interconnector, and orings. Elements are vacuum-sealed in a polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.
Hydranautics believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. Hydranautics assumes no liability for results obtained or damages incurred through the application of the presented information and data. It is the user's responsibility to determine the appropriateness of Hydranautics' products for the user's specific end uses.

Notice 2:
If your customer insists existing brand, please contact Hydranautics or its distributors.
If you and your customer accept economical & quick-delivery equivalent of similar or better performance with same warranty, kindly send us an inquiry now.

Next Product：Hydranautics SWC5-LD-4040 RO Membrane